An EWI or Aerophone can sound like a convincing saxophone if you pair it with the right sound and spend a few minutes on setup. Below are the VG saxophone instruments, grouped by format, each with two demo videos: one played from a keyboard with a breath controller and one played on a wind controller. After the demos you will find what to look for in a sax VST, how to set up your controller, and tips for a more realistic sound.
Listen to the demos, and later to your own playing, on good headphones. If a sound works on headphones, it will also work on other speakers once their settings are right. Turning the volume up a little helps too: you start to hear the small details of tone and response, which makes the sound better for the listener and the playing more comfortable for you.
Saxophone virtual instruments (VST, VST3, AU, standalone)
Stand-alone plugins and apps for Windows and Mac. Each one has its own tone colours, articulations (falls, squeezes, soft and accented attacks, bend) and effects (expression, vibrato, growl, wah). They play from a wind controller, or from a MIDI keyboard using aftertouch, mod wheel and keyswitches.
VG Jazz Alto Saxophone Virtual Instrument
More than 460 samples and six tone colours: Subtone, Warm, Soul, Smooth, Bright and Lead.
VG Jazz Tenor Saxophone Virtual Instrument
More than 410 samples and five tone colours: Subtone, Warm, Smooth, Bright and Lead.
VG Jazz Soprano Saxophone Virtual Instrument
More than 420 samples and five tone colours: Subtone, Warm, Smooth, Bright and Lead.
VG Wind Ensemble (VST, VST3, AU, standalone)
VG Wind Ensemble is a free engine for Windows and Mac that loads VG instrument sound sets, saxophones among them: six alto voices (Warm 1 and 2, Bright 1 and 2, Lead, Subtone), five tenor voices (Warm, Bright, Lead, Subtone 1 and 2), four soprano voices and a baritone. Sound sets are sold one by one, as packs, or in the Essential (17 sounds) and Complete (77 sounds) collections. The engine adds falls, squeezes, soft and accented attacks, bend, growl, vibrato and wah, and its Morph Mixer blends up to three layers, for example alto and tenor, with one controller. The Core edition is free, so you can try the engine with your controller before buying sounds.
Kontakt libraries
All Kontakt libraries need the full version of Native Instruments Kontakt 5.6.8 or later; the free Kontakt Player is not supported.
The VG Jazz Kontakt series has up to four velocity layers per key, aftertouch, mod wheel and keyswitch control, falls, squeezes, soft and accented attacks, bend, and vibrato, growl, subtone and wah effects.
VG Jazz Alto Saxophone
More than 320 samples and five tone colours: Subtone, Warm, Soul, Bright and Lead.
VG Jazz Tenor Saxophone
More than 350 samples and the same five tone colours.
VG Jazz Soprano Saxophone
More than 380 samples and the same five tone colours.
VG Jazz Baritone Saxophone
More than 280 samples, with vibrato, growl and subtone effects.
The Saxophone Master EWI series was designed from the start for the AKAI EWI, so the main parameters can be controlled from the EWI itself, and each library comes with a start guide that includes basic EWI4000s settings. It also plays from a MIDI keyboard. The effects are Bright, Rotator, Distortion, Growl (Vibrato on the baritone), Wah-Wah and Talk Box, and every library includes extra trumpet, Harmon-muted trumpet, flute and trombone samples for building an ensemble.
Saxophone Master EWI Alto
More than 240 samples, recorded through an SSL 4000 console and Neumann U47 microphones.
Saxophone Master EWI Tenor
More than 400 samples, with jazz and subtone sounds.
Saxophone Master EWI Soprano
More than 300 samples.
Saxophone Master EWI Baritone
More than 270 samples.
SFZ libraries
SFZ libraries play in the free Plogue Sforzando or in ARIA Player, so you can use them without buying a sampler. Each has two sample sets.
VG Alto Saxophone SFZ
More than 220 samples with up to three velocity layers per key, in Warm and Bright sample sets.
VG Tenor Saxophone SFZ
More than 150 samples.
VG Soprano Saxophone SFZ
More than 160 samples.
AudioLayer instruments for iPad and iPhone
These sound libraries load into the AudioLayer app (version 1.8 or later for the alto, 1.9 or later for the others), so you can play a saxophone from an iPad or iPhone with no computer. Each note is sampled separately, and AudioLayer adds distortion, EQ, phaser, flanger, chorus, delay and reverb.
VG Jazz Alto Saxophone for iPad/iPhone
VG Jazz Tenor Saxophone for iPad/iPhone
VG Jazz Soprano Saxophone for iPad/iPhone
VG Jazz Baritone Saxophone for iPad/iPhone
To load a library into the app, watch how to upload a sound library into AudioLayer:
Getting a realistic sax sound from your EWI
The rest of this article is for players who liked a sound and want the details: what makes a sax VST respond well to a wind controller, how to set up the controller, and how to play so the result sounds like a real saxophone.
Why the EWI’s own sax patches often disappoint
The EWI is not a digital copy of a saxophone. It is a MIDI controller shaped like one, and its internal sounds are a compromise between memory size and realism. Most players who want a real sax sound end up playing a software instrument on a computer, where the samples can be much larger and more detailed.
The good news: the EWI sends breath pressure continuously, many times per second. A sampled saxophone that is built to follow this data will respond to every swell, accent and fade the way a horn does. A sax library made only for keyboards, where loudness is fixed by key velocity, will not.
What makes a saxophone VST work with an EWI
When you compare sax sounds for wind controller use, check these points:
- Continuous breath response. Loudness and tone colour should change with breath, not only with note velocity. A saxophone gets brighter and edgier as you blow harder, so volume alone is not enough.
- Clean legato. On a wind controller you change notes without tonguing all the time. The instrument should connect notes smoothly instead of restarting the attack on every note.
- Natural attacks. Soft and accented attacks should depend on how you start the air, so tonguing on the EWI sounds like tonguing on a sax.
- Controllable vibrato. Sax vibrato comes from the jaw. On an EWI it comes from the bite sensor or pitch bend plates, so the sound must follow pitch bend smoothly, without stepping.
- Several tone colours. A subtone ballad and a bright funk lead are different sounds. One sampled sax rarely covers both.
Setting up your EWI for a sampled saxophone
The settings below are a starting point. Names differ between the EWI4000s, EWI5000, EWI Solo and EWI USB, and between EWI and Aerophone, so check your controller’s manual for the exact menu.
- Fingering mode. If you are a saxophonist, switch the EWI from its default EWI fingering to saxophone fingering. It adds alternate fingerings that will feel familiar.
- Transposition. Leave the EWI at concert pitch and transpose in the plugin, or set the EWI to B♭ or E♭ so you can read your usual sax parts. Do it in one place only, or you will transpose twice.
- Breath output. All VG instruments listen to CC2 for breath by default, so set your controller to send breath on CC2. Other plugins may use CC11 instead; the controller and the plugin must use the same number. If nothing changes when you blow softer, this is the first thing to check.
- Breath gain and curve. Set the gain so your normal playing reaches the loud end without straining, and your softest air still produces a quiet, steady note. If soft playing jumps straight to medium, lower the gain or use a gentler curve.
- Key delay. A short key delay hides the tiny moment when fingers do not land at the same time. Without it, fast passages produce short wrong notes that sound like glitches.
- Bite and pitch bend. Decide how you will make vibrato. Bite vibrato from the mouthpiece usually sounds more natural than the thumb plates. Keep the plugin’s pitch bend range small, around one or two semitones, so vibrato stays subtle.
- Latency. Set your audio buffer as low as your computer allows. Above about 10 ms many players start to feel a lag between air and sound. On Windows use an ASIO driver.
Playing tips for a more realistic sax sound
- Think in phrases, not notes. Tongue the start of a phrase and slur within it. Tonguing every note on an EWI sounds mechanical.
- Shape long notes. A real saxophonist rarely holds a flat volume. Start a little under, swell, and taper the end.
- Delay the vibrato. Start a long note straight and bring in vibrato after a moment. Constant vibrato from the attack is one of the most obvious tells of a synthetic sax.
- Use the colours. Switch to a subtone sound for quiet ballad lines, a warm sound for melodies, and a bright or lead sound for solos over a band.
- Stay in the real range. The EWI covers about seven octaves; an alto or tenor covers about two and a half. Notes far outside the real range break the illusion.
- Add articulations sparingly. One fall at the end of a phrase or one growled note sounds expressive. On every phrase it sounds like a gimmick.
Which one should you start with?
If you are new to software instruments, start with the free VG Wind Ensemble Core. Test it with your controller, then add the alto, tenor, soprano or baritone sounds you need. If you mostly play one saxophone, a dedicated VG Jazz Saxophone virtual instrument is simpler. If you already work in Kontakt, choose the VG Jazz Kontakt series, or Saxophone Master EWI if you want an instrument tied closely to EWI controls. With no sampler at all, the SFZ libraries play in the free Sforzando. To play without a computer, use the AudioLayer versions on an iPad or iPhone.
Whichever you choose, spend ten minutes on breath gain and key delay, listening on headphones, before judging the sound. Most “this doesn’t sound like a sax” problems come from the setup, not the samples.
